RB1100AH

This device is a high performance 1U rackmount Gigabit Ethernet router.

It has thirteen individual gigabit Ethernet ports, two 5-port switch groups, and includes Ethernet bypass capability. RB1100AH also has a SODIMM slot with bundled 2GB of RAM, one microSD card slot, a beeper and a serial port.

Up to half a million packets per second and more than 3Gbit throughput possible!

The RB1100AH comes preinstalled in a 1U aluminium rackmount case, with power supply and power plug, assembled and ready to deploy.

 

  Product specifications

Details
Product code RB1100AH
CPU speed 1066MHz
Architecture PPC
RAM 2GB
LAN ports 13
Gigabit Yes
MiniPCI 0
Integrated Wireless 0
USB 0
Memory Cards 1
Memory card type microSD
Power Jack 110/220V
802.3af support No
PoE 12-24VDC
Voltage Monitor Yes
CPU temperature monitor Yes
PCB temperature monitor Yes
Dimensions 1U case: 44 x 176 x 442 mm, 1200g. Board only: 365g
Operating System RouterOS
Temperature range -25? to +65?
RouterOS License Level6
Current Monitor Yes
CPU P2010
Max Power consumption 20W

 

 Throughput results

RB1100AH Series @1066MHz (Ethernet only test) 64 byte frames 512 byte frames 1518 byte frames
IP Firewall Conntrack Mode Mbps Fps Mbps Fps Mbps Fps
off off Bridging 247.81 484000 1862.45 454700 2950.99 243000
on off Routing 184.32 360000 1445.89 353000 2950.99 243000
on off Bridging 117.91 230300 897.02 219000 2368.08 195000
on on Routing 117.76 230000 913.41 223000 2532.02 208500
on on Bridging 80.9 158000 626.69 153000 1773.02 146000

    Notes:
  1. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
    Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
  2. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.